disable ntp broadcast-client
Disables an NTP broadcast client on the switch.
|broadcast-client||Specifies enabling NTP broadcast client.|
|vr||Specifies disabling NTP broadcast client for a VR.|
|vr_name||Specifies the VR name. If a VR name is not specified, the VR of current command context is used.|
An NTP broadcast client is enabled by default.
If a VR name is not specified, the VR of current command context is used.
If the broadcast client function is enabled, the system can receive broadcast-based NTP messages and process them only if a VLAN is enabled for NTP and the VLAN is active.
The following command disables an NTP broadcast client on the switch:
disable ntp broadcast client
This command was first available in ExtremeXOS 12.7.
The vr was added in ExtremeXOS 22.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.