configure cdp device-id

configure cdp device-id [device_id | system-mac | system-name]

Description

Configures the device ID only in CDP.

Syntax Description

device-id Unique device identifier to be used in CDP.
system-mac Use system MAC address as the device identifier.
system-name Use sysName as the device identifier (default).

Default

system-name.

Usage Guidelines

Use this command to configure the Device ID. If you do not configure it, the MAC address is used as the Device ID. This configuration of device ID is only used in the CDP .

Example

The following command configures the device ID as the MAC address:

configure cdp device-id system-mac

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.