configure cfm segment transmit-interval
Configures the transmission interval of DMM frames.
|segment_name||An alpha numeric string identifying the segment name.|
|frame-delay||Y.1731 Ethernet Frame Delay Measurement.|
|frame loss||Y.1731 Ethernet Frame Loss Measurement.|
|interval||Specifies the transmit interval in seconds. The range is 1 to 90.|
Use this command to configure the delay between two consecutive DMM frames. The configured delay is for both continuous and on-demand transmission. This command is optional, and if not configured the default interval is used.
The following example configures a transmission interval of 5 seconds for segment s2.
configure cfm segment s2 transmit-interval 5
This command was first available in ExtremeXOS 12.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.