unconfigure bootprelay include-secondary
Description
Removes the specified smart relay configuration that was specified at the VLAN level.
Syntax Description
ipv4 | Specifies unconfiguring the DHCPv4 BOOTP Relay service (default). |
ipv6 | Specifies unconfiguring the DHCPv6 BOOTP Relay service. |
vlan | Unconfigures BOOTP relay for a specified VLAN. |
vlan_name | Specifies the VLAN name. |
include-secondary | Removes the include-secondary configuration for the specified VLAN. |
Default
IPv4 is the default relay service.
Usage Guidelines
Use this command to remove the specified smart relay configuration that was specified at the VLAN level.
Example
The following command removes DHCPv4 BOOTP Relay service, and removes the include-secondary configuration for the VLAN "vlan 100":
unconfigure bootprelay ipv4 vlan vlan_100 include-secondary
History
This command was first available in ExtremeXOS 15.4.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.