enable stpd
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
| stpd_name | Specifies an STPD name on the switch. |
Default
Enabled.
Usage Guidelines
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.