configure neighbor-discovery cache retransmit-time
Description
Sets the value for Neighbor Discovery Protocol (NDP) retransmit time
Syntax Description
retransmit-time | Specifies setting the retransmit time. |
retransmit_time | Sets the retransmit time value (range is 1–4,294,967 seconds or 1– 4,294,967,295 milliseconds). The default is 1 second. |
milliseconds | When setting the retransmit time value, specifies milliseconds as the time unit (range is 1–4,294,967,295). |
seconds | When setting the retransmit time value, specifies seconds (range is 1–4,294,967) as the time unit (default). |
Default
The default setting for the retransmit time is 1 second. The default unit of measure is seconds.
Example
The following example sets the retransmit time to 500,000
seconds:
configure neighbor-discovery cache retransmit-time 500000 seconds
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.2 Feature License Requirements document.