This command displays information about neighbors and their adjacencies.
|area_name||Specifies a router process for which to specify neighbor information. If you do not specify an IS-IS area, the software displays the neighbors in all areas.|
|vlan_name||Specifies a VLAN for which to specify neighbor information.|
|ipv4||Displays only the neighbors that advertise the IPv4 protocol as supported.|
|ipv6||Displays only the neighbors that advertise the IPv6 protocol as supported.|
|detail||Displays detailed information for IS-IS neighbors.|
If you do not specify either the ipv4 or the ipv6 keyword, this command displays all neighbors regardless of the supported protocol.
The following command displays IS-IS neighbor information for areax:
show isis neighbors area areax
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Core or Premier license as described in the ExtremeXOS 32.2 Feature License Requirements document.