unconfigure mvrp stpd
Description
Resets the MVRP STP domain.
Syntax Description
mvrp | Multiple VLAN Registration Protocol. |
stpd | The STP domain the VLAN is to be associated with. All ports of the domain will be advertised when this VLAN is registered. |
Default
s0.
Usage Guidelines
Use this command to reset the STP domain associated with a particular VLAN or all VLANs to default. If a VLAN is specified, the specific VLAN will be associated to the default STP, which is configured using the configure mvrp stpd stpd_name default command. If VLAN is not specified, all VLANs are associated to STP domain s0.
Example
The following example illustrates the unconfigure mvrp stpd command:unconfigure mvrp stpd
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.