enable bootp vlan
Description
Enables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the VLAN from a BOOTP server.
Syntax Description
| bootp | Enable BOOTP client. |
| ipv4 | IPv4 client. |
| dhcp | Enable DHCP client. |
| ipv6 | IPv6 client. |
| vlan | Specifies a VLAN name. |
| all | Specifies all VLANs. |
Default
Disabled.
Usage Guidelines
If IPv4/IPv6 keyword is not specified , ipv4 would be taken as default for the mentioned VLAN.
Example
The following example enables the generation and processing of BOOTP packets on a VLAN named "accounting":
enable bootp vlan accounting
History
This command was first available in ExtremeXOS 10.1.
The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.