Disables RIP from redistributing routes from other routing protocols.
| bgp | Specifies BGP routes. |
| direct | Specifies interface routes (only interfaces that have IP forwarding enabled are exported). |
| e-bgp | Specifies external BGP routes. |
| i-bgp | Specifies internal BGP routes. |
| ospf | Specifies all OSPF routes. |
| ospf-extern1 | Specifies OSPF external route type 1. |
| ospf-extern2 | Specifies OSPF external route type 2. |
| ospf-inter | Specifies OSPF-inter area routes. |
| ospf-intra | Specifies OSPF-intra area routes. |
| static | Specifies static routes. |
| isis | Specifies IS-IS routes. |
| isis-level-1 | Specifies ISIS Level 1 routes. |
| isis-level-1-external | Specifies ISIS Level 1 External routes. |
| isis-level-2 | Specifies ISIS Level 2 routes. |
| isis-level-2-external | Specifies ISIS Level 2 External routes. |
Disabled.
This command disables the exporting of BGP, static, direct, and OSPF-learned routes into the RIP domain.
The following command disables RIP from redistributing any routes learned from OSPF:
# disable rip export ospf
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.2 Feature License Requirements document.