clear ports link-flap-detection status
Manually enables ports that have been disabled due to excessive link-flapping.
|port_list||List of ports that you want to enable that were disabled due to excessive link flapping.|
|all||Enables all ports in the system that were disabled due to excessive link flapping.|
|status||Enable ports currently in disabled state due to excessive link flapping.|
Ports that have been disabled due to excessive link flapping cannot be enabled using the enable port command. They must be enabled using the clear ports link-flap-detection status command.
The following example re-enables all ports on the switch that were disabled due to excessive link flapping:
clear ports all link-flap-detection status
This command was first available in ExtremeXOS 22.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.