Unconfigures the link MTU value sent in router discovery advertisements on the VLAN.
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command sets the link-mtu parameter to the default value of 0.
The following example unconfigures the link MTU for the VLAN "top_floor":
unconfigure vlan top_floor router-discovery link-mtu
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.2 Feature License Requirements document.