show network-clock sync-e ports

Example

The following command displays SyncE information for ports 1 - 12:

show network-clock sync-e ports 1-12

Following is sample output:

===================================================================
Port  Flags    Input        Configured    Output        Source 
            Clock Quality Clock Quality Clock Quality (Port Number)
===================================================================
1    S2       QL-SSU-A
2    S1       QL-PRC
3    S
4    S
5    S
6    S                                   QL-PRC        SOURCE-1 (2)
7    S
8    S
9    S
10   S
11   S
12   S
===================================================================
Flags   : (S) SyncE Supported, (N) SyncE Not Supported,
          (O) SyncE Supported for Output Only,
          (E) SyncE Enabled,   (f) Forced Source Clock,
          (1) Clock Source 1,  (2) Clock Source 2,