Configures the maximum amount of the shared packet buffer to be used by the specified ports.
|port_list||Specifies a list of ports or slots and ports.|
|percent||Specifies the maximum portion of the shared packet buffer to allot. The range is 0 to 100 percent.|
On some platforms, the hardware provides a limited number of settings. In these cases, ranges of percentage values achieve the same setting.
NoteYou can view the configured percentage value using the show ports port-list info detail command.
NoteYou can view the effect of this command using the show ports port-list buffer command.
It is possible to overcommit the shared packet buffer using this command.
configure port 1:1 shared-packet-buffer 50
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.