show fabric attach zero-touch-client
Description
Displays the configured ZTC mappings for Fabric Attach Zero Touch Clients.
Syntax Description
zero-touch-client | Displays Zero Touch Clients. |
Default
If no mapping is present, no information will be displayed for the client type.
Usage Guidelines
This command is only used when mappings are present.
Example
The following example displays configured Fabric Attach Zero Touch Clients:
# show fabric attach zero-touch-client Client Name VLAN Name NSI/I-SID Priority Status ------------------- -------------------------------- --------- -------- -------- wap-type1 VLAN_123 11111 dot1p Enabled camera VLAN_200 2000 5 Disabled ona-spb-over-ip VLAN_4001 40001 7 Enabled
History
This command was first available in ExtremeXOS 31.3.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.