unconfigure qosprofile

unconfigure qosprofile {ports [port_list|all]}

Description

Returns the rate-shaping parameters for all QoS profiles on the specified ports to the default values.

Syntax Description

port_list Specifies the ports on which to unconfigure QoS profiles.
all Specifies that this command applies to all ports on the device.

Default

The default values for egress bandwidth on all supported platforms are:
  • Minimum bandwidth—0%

  • Maximum bandwidth—100%

The default values for egress priority and ingress QoS profiles differ by platform as described in the following sections.

The default values for the two default egress QoS profiles (QP1 and QP8) are:

Usage Guidelines

None.

Example

The following command resets the QoS profiles for all ports to default settings:
unconfigure qosprofile

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.

The egress and ports parameters are available only on all platforms.