configure radius retries

configure radius {mgmt-access [primary | secondary] | netlogin [primary | secondary] | index} retries retries


This command is used to set the number of retries the switch will attempt. This value may be global or on a per server basis.

Syntax Description

mgmt-access RADIUS authentication for management access.
netlogin RADIUS authentication for netlogin access.
primary Primary server.
secondary Secondary server.
index RADIUS server index.
retries RADIUS server retries.
retries RADIUS sever retries. Range 1-20.


The default value is 3, with a range of 0-10.

Usage Guidelines



This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.