enable pim iproute sharing
Description
Enables the PIM ECMP feature.
Syntax Description
iproute | IP Route. |
sharing | Equal Cost Multipath Routing. |
Default
Disabled.
Usage Guidelines
- Source
- Group
- Source-Group
- Source-Group-Next-Hop
This feature does load splitting, not load balancing, and operates on a per (S, G) and (*;G) basis, splitting the load onto the available equal cost paths by hashing according to the selection criteria defined by the user.
Make sure that IP route sharing is also enabled using enable iproute {ipv4| ipv6} sharing.
Example
The following command enables the PIM ECMP feature:
enable pim ipv4 iproute sharing
History
This command was first available in ExtremeXOS 15.3.2.
Platform Availability
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS 32.2 Feature License Requirements document.