configure mirror control_index

configure mirror control_index [ add | delete ] mirror_name

Description

Adds or deletes existing mirrors to a mirror MIB instance (specified by a control index) .

Syntax Description

mirror_name Specifies a specific mirror name to add to or delete from a mirror MIB instance.
control_index

Mirror destination control index (1–4).

Also known as: etsysMirrorDestinationControlIndex. Each comprises a group of mirror names.

add Specifies adding a mirror name to group referenced by a control index.
delete Specifies deleting a mirror name from a group referenced by a control index.

Default

N/A.

Usage Guidelines

To use policy-based mirroring, you need a mirror MIB instance (designated by a control index) with one or more associated mirrors to apply mirrors to a policy profile.

Only mirrors with a single 'to' port or remote-ip can be applied to a mirror MIB instance.

Example

The following example adds existing mirror "mirror1" to mirror MIB instance with control index "2":

configure mirror 2 add mirror1

History

This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.