enable ntp vlan

enable ntp [{vlan} vlan-name | all] {{vr} vr_name}


Enables NTP on a VLAN.

Syntax Description

enable Enables NTP on a VLAN.
vlan-name Specifies the name of a particular VLAN on which to enable or disable NTP.
all Enables or disables NTP on all VLANs.
vr Specifies setting up NTP on a VR.
vr_name Specifies the VR name to enable NTP on. If a VR name is not specified, the VR of current command context is used.


NTP is disabled on all VLANs by default.

Usage Guidelines



The following command enables NTP on a VLAN named “Southwest”:

enable ntp vlan Southwest


This command was first available in ExtremeXOS 12.7.

The vr option was added in ExtremeXOS 22.2

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.