Shows auto-peered OneConfig information configured on the device.
auto-peering | Specifies Auto-peering. |
one-config | Specifies changing the BGP Auto-peering OneConfig configuration. |
remote | Displays only remote ID information. |
service | Displays only service information. |
route | Displays only host-driven static route information. |
database | Displays only overlay database information. |
bootprelay | Displays only BOOTP relay information. |
N/A.
To configure remote IDs, use the configure auto-peering one-config remote id [add | delete] id {password [none | {encrypted} tcpPassword]} command.
To configure services, use the configure auto-peering one-config nsi-id id type [nsi | vrf] [add | delete] [[ipaddress {netmask} | ipNetmask ] | ipNetmaskv6] {vr vrname } command.
To configure routes, use the configure auto-peering one-config iproute [add | delete] [host | hostv6] [[ipaddress {netmask} | ipNetmask] gateway | ipNetmaskv6 gatewayv6] {vr vrname } command.
To configure overlay databases, use the configure auto-peering one-config overlay [add | delete] server [address | addressv6] {type bgp-rr } {id id} {password [none | {encrypted} password]} command.
To configure BOOTP relay, use the configure auto-peering one-config bootprelay [add | delete] [ip_address | ipv6_address] vr vrname comamnd.
The following example shows all auto-peered OneConfig information:
# show auto-peering one-config ID : 0 Password : None Route Target : None Anycast MAC : 00:00:00:1b:1b:1b OneConfig Allowed Remote IDs Remote ID Password ----------- ---------------------------------- 23456 None 34567 #$HktHhKOFo/Tk1YtJC1pBz24ZMBHCGg== OneConfig Dynamic Service NSI Service Type VRF Address Installed ------------ -------- ------------ ------------------------------------------- --------- 1000 VRF red 0.0.0.0/0 YES 1001 NSI red 50.1.101.1/24 YES 1002 NSI red 50.1.102.1/24 YES 1003 NSI red 50.1.103.1/24 NO 1004 NSI red 50.1.104.1/24 YES 2000 VRF blue 0.0.0.0/0 YES 2001 NSI blue 50.1.201.1/24 YES 2002 NSI blue 50.1.202.1/24 YES 2003 NSI blue 50.1.203.1/24 NO 2004 NSI blue 50.1.204.1/24 YES 3001 NSI VR-Default 50.1.131.1/24 YES 3002 NSI VR-Default 50.1.132.1/24 YES 3003 NSI VR-Default 50.1.133.1/24 NO 4002 NSI VR-Default 1000:2000:3000:4000:5000:6000:7000:8000/128 NO OneConfig Dynamic Host Static Routes VRF Host Route Gateway Installed ------------ ------------------------ --------------------------- ----------------------- --------- red 50.1.102.101 60.1.1.0/24 50.1.102.101 NO red 50.1.103.104 70.1.1.0/24 50.1.103.104 NO red 50.1.103.104 80.1.1.0/24 50.1.103.104 NO OneConfig Overlay Database Database Address Type ID Password --------------------------------------- -------- --------------- ----------------------- 50.1.133.104 Redis 2000 None 50.1.133.105 BGP_RR 2000 None OneConfig Dynamic Bootprelay VRF Server -------------------- --------------------------------------- VR-Default 50.1.131.105 blue 50.1.201.105 red 50.1.101.105
This command was first available in ExtremeXOS 31.1.
This command is available on the ExtremeSwitching X465, X590, X695 series switches.
This feature requires the Advanced Edge or Base license. For more information about licenses, see the ExtremeXOS 32.2 Feature License Requirements .