enable rip originate-default cost
Description
Configures a default route to be advertised by RIP.
Syntax Description
always |
Specifies to always advertise the default route. |
cost number |
Specifies a cost metric. The range is 1 - 15. |
tag number |
Specifies a tag number. |
Default
Disabled.
Usage Guidelines
If always is specified, RIP always advertises the default route to its neighbors. If always is not specified, RIP advertises a default route only if a reachable default route is in the system route table.
The default route advertisement is filtered using the out policy.
The cost metric is inserted for all RIP-learned, static, and direct routes injected into RIP. The tag value is used only by special routing applications.
Example
The following command configures a default route to be advertised by RIP if there is a default route in the system routing table:
# enable rip originate-default cost 7
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.2 Feature License Requirements document.