show forwarding hardware-utilization

show forwarding hardware-utilization {slot [slot_num | all]}

Description

Shows forwarding hardware table utilization statistics.

Syntax Description

hardware-utilization Specifies showing hardware table utilization statistics.
slot Specifies selecting slots.
slot_num Specifies which slots to show statistics for.
all Specifies showing statistics for all slots.

Usage Guidelines

Shows forwarding hardware table utilization statistics with L2, L3 and ACLs configured.

Example

The following example shows table utilization statistics:

# show forwarding hardware-utilization

Hardware Table Utilization Statistics

Slot: 1
Type: X450
Resource Type           Current    Maximum    % Util.
--------------------    -------    -------    -------
MAC Entries                   0      73727          0
Host Entries                  0      73728          0
IPv4 Entries                  0      73728          0
IPv6 Entries                  0      36864          0
Long IPv6 Entries             0       2048          0
Total Routes                  0      16384          0
IPv4 Neighbors                0        N/A        N/A
IPv6 Neighbors                0        N/A        N/A
IPv4 Routes                   0        N/A        N/A
IPv6 Routes                   0        N/A        N/A
ECMP Next Hops                0       1023          0
ACL Ingress Entries          40       6144          0
ACL Ingress Counters          0      38912          0
ACL Ingress Meters            0       2048          0
ACL Ingress Slices            0         12          0
ACL Egress Entries            0       1024          0
ACL Egress Counters           0       1024          0
ACL Egress Meters             0       1024          0
ACL Egress Slices             0          4          0
ACL VLAN Entries *                   1       2048          0
ACL VLAN Slices *                    1          4         25

Legend: N/A - Maximum not defined in published sFlow structure.
        *   - Resource type not defined in published sFlow structure.
              Also see IP usage in 'show iproute reserved-entries statistics'.

History

This command was first available in ExtremeXOS 22.6.

Legend explaining N/A entries was added in ExtremeXOS 30.1.

ACL VLAN entries and slices was added in ExtremeXOS 30.7.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.