configure stpd ports auto-edge
Description
Enables and disables auto-edge detection.
Syntax Description
stpd_name | Specifies an STPD name on the switch. |
on | Enables auto-edge detection on the specified port. |
off | Disables auto-edge detection on the specified port. |
port_list | Specifies one or more ports or slots and ports. |
Default
By default, auto-edge detection is on.
Usage Guidelines
None.
Example
The following example enables auto-edge detection on port 1:10 in STP domain r1:
configure stpd r1 ports auto-edge on 1:10
History
This command was first available in ExtremeXOS 15.7.1.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.