This command configures a keychain accept tolerance in seconds.
|keychain_name||Specifies the name of the keychain.|
|accept-tolerance||Specifies the length of time an expired key can be accepted for received packets.|
|seconds||Specifies the tolerance in seconds. Range is 0-600 (default is 0).|
The default is 0, no tolerance.
Use this command to configure a keychain accept tolerance.
The following command configures the keychain accept tolerance:
configure keychain accept-tolerance 55
This command was first available in ExtremeXOS 31.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.