configure iparp reachable-time
Sets the value for Address Resolution Protocol (ARP) reachable time
|reachable-time||Specifies setting the ARP reachable time.|
|reachable_time||Sets the value for the ARP reachable time (range is 1–1,474,515,000 milliseconds or 1–1,474,515 seconds).|
|auto||Specifies having the ARP reachable time set automatically to 3/4 of the configured ARP timeout (default).|
|milliseconds||When setting the reachable time value, specifies milliseconds as the time unit (range is 1–1,474,515,000).|
|seconds||When setting the reachable time value, specifies seconds (range is 1–1,474,515) as the time unit (default).|
The default setting is for the reachable time to be set automatically to 3/4 of the configured ARP timeout. If you set the time manually, the default unit of measure for the value is seconds.
The following example sets the reachable time to 500,000 seconds:
configure iparp reachable-time 500000 seconds
This command was first available in ExtremeXOS 11.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.