configure ports qosprofile
Description
Creates a port-based traffic group, which configures one or more ingress ports to use a particular egress QoS profile.
Syntax Description
port_list | Specifies a list of ports or slots and ports. |
qosprofile | Specifies a QoS profile. |
Default
All ingress ports have the default qosprofile of QP1.
Usage Guidelines
This command assigns traffic ingressing the specified port to a specified egress QoS profile. Extreme switches support eight egress QoS profiles (QP1 to QP8) for each port. SummitStack does not permit configuration of QP7.
Example
The following command configures port 5 to use QoS profile
QP3:
configure ports 5 qosprofile QP3
History
This command was first available in ExtremeXOS 11.0.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.