show auto-peering

show auto-peering {bgp | ospf}

Description

This command displays the status of BGP or OSPF auto-peering and the learned auto-peering interfaces and corresponding remote peer information.

Syntax Description

ospf Shows OSPF auto-peering status and interface information.
bgp Shows BGP auto-peering status and interface information.

Default

N/A

Usage Guidelines

All existing BGP show commands can be used to display the status of BGP peers and routes.

Example

The following example shows the status of BGP auto-peering:

# show auto-peering bgp 
Type     : BGP
Password : 
Id       : 0              
Router ID: 2.2.2.102      
AS       : 102

Peer Id     Password 
----------- ----------------------------------
2222        None
2223        #$75Zvb3YfCBE/4+eSQE5dA5T2lmhF5A==

VLAN          Neighbor IP Address      Router ID       Remote AS  Port    Fabric ID  Peer  
------------- ------------------------ --------------- ---------- ------- ---------- -----
SYS_BGP_0002  fe80::204:96ff:fe9d:66e8 3.3.3.103       103        69      0          Yes  
The following example shows OSPF auto-peering information:
# show auto-peering ospf
 
Type     : OSPF
Id       : 0              
Router ID: 1.1.1.54      
 
VLAN          Router ID       Port    Fabric ID  Peer 
------------- --------------- ------- ---------- -----
SYS_OSPF_0002 1.1.1.55        19      0          No   

History

This command was first available in ExtremeXOS 22.5.

Peer ID and password information was added in ExtremeXOS 30.5.

The ospf option was added in ExtremeXOS 30.6.

Platform Availability

This command is available on the ExtremeSwitching X465, X590, X695 series switches.

This feature requires the Advanced Edge license. For more information about licenses, see the ExtremeXOS 32.2 Feature License Requirements .