Viewing the active RP

Perform this procedure to show information about the active RP for all the running multicast groups on the switch.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > IP.
  2. Click PIM.
  3. Click the Active RP tab.

Active RP field descriptions

Use the data in the following table to use the Active RP tab.

Name

Description

GroupAddress

Shows the IP address of the multicast group.

Address

Shows the IP address of the RP router. This address must be one of the local PIM-SM enabled interfaces.

Priority

Shows the priority of the RP.