Display Remote IS-IS and SPBM Summary

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to view the remote Intermediate-System-to-Intermediate-System (IS-IS) and SPBM summary.

Procedure

  1. In the navigation pane, expand the Configuration > IS-IS folders.
  2. Select IS-IS Remote.
  3. Select the Protocol Summary tab.

Protocol Summary Field Descriptions

Use data in the following table to use the Protocol Summary tab.

Name

Description

AdminState

Indicates the global status of remote IS-IS on the switch.

SystemId

Indicates the remote IS-IS system ID of the switch.

NodeNickName

Indicates the nickname for the remote SPBM instance globally.

Circuit Index

Indicates the identifier of the IS-IS circuit. This value is for SNMP indexing purposes only and does not have any relation to any protocol value.

IfIndex

Indicates the interface to which the circuit corresponds.

AdminState

Indicates the administrative state of the circuit.

  • on
  • off

OperState

Indicates the operational state of the circuit.

  • up
  • down

Circuit Index

Indicates the unique identifier of the remote IS-IS circuit. This value is for SNMP Indexing purposes only and does not have any relation to any protocol value.

AdjIndex

Indicates value identifying the IS-IS adjacency from all other such adjacencies on the circuit. The system dynamically assigns this value when it forms an adjacency.

Interface

Indicates the remote IS-IS interface.

AdjState

Indicates the state of the adjacency:

  • down
  • initializing
  • up
  • failed

AdjNeighSysID

Indicates the system ID of the neighboring IS-IS.

AdjHostName

Indicates the host name listed in the LSP, or the system name if the host name is not configured.