Displaying FA Zero Touch Client Attachment

Use this procedure to display the Zero Touch Client Attachment data you have configured on an FA Server.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display Zero Touch Client Attachment data:

    show fa zero-touch-client

Example

The following example displays sample output for the show fa zero-touch-client command.

Switch:1#show fa zero-touch-client

================================================================================

                             Fabric Attach Zero Touch Client
================================================================================

Type     Description      I-SID      VLAN
--------------------------------------------------------------------------------
6   			wap-type1			 11111			123
11				camera				 2000			200
17				ona-spb-over-ip 40001      4001
--------------------------------------------------------------------------------

 3 out of 3 Total Num of Fabric Attach Zero Touch Client entries displayed
--------------------------------------------------------------------------------