View Level 1 Area Information

Use the following procedure to display Level 1 area information. IS-IS provides support for hierarchical routing, which enables you to partition large routing domains into smaller areas. IS-IS uses a two-level hierarchy, dividing the domain into multiple Level 1 areas and one Level 2 area. The Level 2 area serves as backbone of the domain, connecting to all the Level 1 areas.

Important

Important

The IEEE 802.1aq standard currently only defines the use of one hierarchy, Level 1. Level 2 function is disabled.

Procedure

  1. In the navigation pane, expand Configuration > IS-IS.
  2. Select IS-IS.
  3. Select the L1 Area tab.

L1 Area field descriptions

Use the data in the following table to use the L1 Area tab.

Name

Description

AreaAddr

Specifies an area address reported in a Level 1 link-state packets (LSP) generated or received by this Intermediate System.