Clear Neighbor Discovery Inspection Statistics

About this task

Use this procedure to clear the Neighbor Discovery inspection statistics.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Clear the Neighbor Discovery inspection statistics:

    clear ipv6 fhs statistics nd-inspection [{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}]

    Note

    Note

    Alternatively, you can use the command clear ipv6 fhs statistics all to clear the ND inspection statistics along with RA guard statistics and DHCPv6 Guard statistics.

Variable Definitions

The following table defines parameters for the clear ipv6 fhs statistics nd-inspection command.

Variable

Value

{slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
9037147-00 Rev AB