Viewing EAPoL Authenticator Statistics

Use EAPoL Authenticator statistics to display the Authenticator Port Access Entity (PAE) statistics for each selected port.

Procedure

  1. On the Device Physical View, select the port you want to graph.

    The system displays a yellow outline around the selected ports

    If you want to select multiple ports, press Ctrl and hold down the key while you click the ports you want to configure. The system displays a yellow outline around the selected ports.

  2. In the navigation pane, expand the Configuration > Graph folders.
  3. Click Port.
  4. Click EAPOL Stats.
  5. If you selected multiple ports, from the Graph port EAPoL Stats tab Show list, select: Absolute Value, Cumulative, Average/sec, Minimum/sec, Maximum/sec, or LastVal/sec.

EAPOL Stats Field Descriptions

The following table describes values on the EAPOL Stats tab.

Name

Description

InvalidFramesRx

Displays the number of EAPoL frames received by this Authenticator in which the frame type is not recognized.

EapLengthErrorFramesRx

Displays the number of EAPoL frames received by this Authenticator in which the Packet Body Length field is invalid.

StartFramesRx

Displays the number of EAPoL start frames received by this Authenticator.

EapFramesRx

Displays the number of EAPoL-EAP frames received by this Authenticator.

LogoffFramesRx

Displays the number of EAPoL Logoff frames received by this Authenticator.

LastRxFrameVersion

Displays the last received version of the EAPoL frame by this Authenticator.

LastRxFrameSource

Displays the source MAC address of the last received EAPoL frame by this Authenticator.

AuthEapFramesTx

Displays the number of EAPoL-EAP frames transmitted by the Authenticator.