Viewing the IPv6 active RP

Perform this procedure to show information about the IPv6 active RP for all the running multicast groups on the switch.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > IPv6.
  2. Click IPv6 PIM.
  3. Click the Active RP tab.

Active RP field descriptions

Use the data in the following table to use the Active RP tab.

Name

Description

GroupAddress

Shows the IPv6 address of the multicast group.

Address

Shows the IPv6 address of the RP router. This address can be one of the local PIM-SM enabled interfaces or any reachable global IPv6 address configured using the static-rp CLI command.

Note:

IPv6 link local address is always used as the PIM interface address.

Priority

Shows the priority of the RP.