Configuring VRRP notification control

Perform this procedure to configure VRRP notification control.

Before you begin

  • Assign an IPv6 address to the interface.

  • Enable routing globally.

  • Change the VRF instance as required to configure VRRP notification control on a specific VRF instance. Not all parameters are configurable on non-default VRFs.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > IPv6.
  2. Click VRRP.
  3. Click the Globals tab.
  4. Select enabled.
  5. Click Apply.

Globals field descriptions

Use the data in the following table to use the Globals tab.

Name

Description

NotificationCntrl

Indicates whether the VRRP-enabled router generates SNMP traps for events.

  • enabled: Generate SNMP traps.

  • disabled: Do not generate SNMP traps.

The default is enabled.

9037147-00 Rev AB