Configure UNI

Use the following procedure to configure a Transparent Port UNI or Switched UNI by mapping an I-SID to a port or MLT and VLAN together.

Note

If you are configuring a T-UNI to terminate on a port or MLT on a switch in a vIST switch cluster, you must also configure the T-UNI I-SID on the other switch of the vIST switch cluster. You must configure the T-UNI I-SID on both switches of a vIST pair. It is not necessary to assign an actual port or MLT to the T-UNI on the second switch.

About this task

You must first create a type of service instance identifier (I-SID) to create the different types of services available. After you create an I-SID you can add members (ports or MLTs) to the I-SID to create end-points for the service.

Procedure

In the navigation pane, expand Configuration > IS-IS.
Click ISID.
Click the Service tab.
To create a Transparent Port UNI service:
1. Click Insert.
2. Select elan Transparent in the Type field.
3. Enter the I-SID in the Id field.
To create a Switched UNI service:

Note

Flex UNI must be enabled to create a Switched UNI service.
1. Click Insert.
2. Select elan in the Type field.
3. Enter the I-SID in the Id field.
Click Insert.

Service Field Descriptions

Use the data in the following table to use the Service tab.


Name	Description
ID	Specifies a unique value to identify the service associated with this entry.
Type	Specifies the type of service associated with this entry.
MacLimitEnable	Indicates whether the MAC limit is enabled (true) or disabled (false).
MaxMacLimit	Indicates the maximum learned value of the MAC address for each service I-SID.
Action	Specifies I-SID related actions.
OriginBitMap	Specifies the origin of the I-SID.
VnId	Identifies the VXLAN service associated with this I-SID.
Name Note: This field does not apply to all hardware platforms.	Specifies the name of the I-SID.