Viewing IPv6 RP set parameters

View the IPv6 RP set to see a list of rendezvous point addresses. View the parameters for troubleshooting purposes.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > IPv6.
  2. Click IPv6 PIM.
  3. Click the RP Set tab.

RP Set field descriptions

Use the descriptions in the following table to use the RP Set tab.

Name

Description

GroupAddress

Specifies the IPv6 address of the multicast group. When combined with the group mask, this value identifies a group prefix for which the address is a static RP.

GroupMask

Specifies the address mask of the multicast group. When combined with the group address, this value identifies a group prefix for which the address is a static RP.

Address

Specifies the IPv6 address of the static RP.

HoldTime

Specifies the hold time of the static RP. The value is 0.

ExpiryTime

Specifies the minimum time remaining before the static RP is down. The value is 0.