View MACsec Interface Statistics

Use this procedure to view the MACsec interface statistics using EDM.

Procedure

  1. In the Device Physical View tab, select one or more ports for which you need to view the MACsec interface statistics.

    The switch supports MACsec on specific ports. For more information, see your hardware documentation.

  2. In the navigation pane, expand the Edit > Port > General folders.
  3. Select the MACsec Interface Stats tab.
    Note

    Note

    Use the Clear Stats button to the clear MACsec interface statistics. The Clear Stats button is available to clear single-port as well as multiple-port MACsec interface statistics.

MACsec Interface Stats Field Descriptions

The following table describes the fields in the MACsec Interface Stats tab.

Field

Description

TxUntaggedPkts

Specifies the number of transmitted packets without the MAC security tag (SecTAG), with MACsec disabled on the interface.

TxTooLongPkts

Specifies the number of transmitted packets discarded because the packet length is greater than the maximum transmission unit (MTU) of the common port interface.

RxUntaggedPkts

Specifies the number of received packets without the MAC security tag (SecTAG), with MACsec not operating in strict mode.

RxNoTagPkts

Specifies the number of received packets without the MAC security tag (SecTAG), with MACsec operating in strict mode.

RxBadTagPkts

Specifies the number of received packets discarded with an invalid SecTAG, or with a zero value packet number (PN), or invalid Integrity Check Value (ICV).

RxUnknownSCIPkts

Specifies the number of packets received with an unknown secure channel identifier (SCI), and with MACsec not operating in strict mode.

RxNoSCIPkts

Specifies the number of packets received with an unknown secure channel identifier (SCI), and with MACsec operating in strict mode.

RxOverrunPkts

Specifies the number of packets discarded because the number of received packets exceeded the cryptographic performance capabilities.