Configure BFD on an IPv6 Static Route

BFD for IPv6 interfaces is a demonstration feature on some products. For more information about feature support, see VOSS Feature Support Matrix.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Select IPv6 BFD.
  3. Select Insert.
  4. In the Interface field, select either Port or Vlan and select an interface.
  5. In the NextHop field, type the IPv6 address of the next hop of the BFD session.
  6. Optional: In the VrfId field, type the ID of the VRF associated with the BFD session.

IPv6 BFD Static Route Field Descriptions

Use the data in the following table to use the Static Route tab.

Name Description

Interface

Specifies either a port or VLAN interface.

NextHop

Specifies the IPv4 address of the next hop of the BFD session.

VrfId

Specifies the ID of the VRF associated with the BFD session.

VrfName

Specifies the name of the VRF associated with the BFD session.