Configuring SLPP globally
Enable the Simple Loop Prevention Protocol (SLPP) to detect a loop and automatically stop it.
Procedure
- In the navigation tree, expand the following folders: .
- Click SLPP.
- Click the Global tab.
- Select GlobalEnable.
- In the TransmissionInterval box, type a value for the time interval for loop detection.
- Click Apply.
Global field descriptions
Use the data in the following table to use the Global tab.
|
Name |
Description |
|---|---|
|
GlobalEnable |
Activates or disables SLPP globally. The default is disabled. |
|
TransmissionInterval |
Configures the interval for which loop detection occurs. The interval is expressed in milliseconds in a range from 500–5000. The default value is 500. |
Job aid
The following table provides the SLPP values.
|
Enable SLPP |
Setting |
|---|---|
|
Access SMLT |
Yes |
|
Core SMLT |
No |
|
Primary switch |
|
|
Packet Rx threshold |
5 |
|
Transmission interval |
500 milliseconds (ms) (default) |
|
Secondary switch |
|
|
Packet Rx threshold |
50 |
|
Transmission interval |
500 ms (default) |