Configure LLDP Vendor Specific Information

About this task

Use this procedure to configure the Link Layer Discovery Protocol (LLDP) vendor-specific information on a call server or a file server.

Note

Note

After you configure LLDP vendor specific call server information, the SIP Proxy of the phone is configured as transport type Transport Layer Security (TLS) port 5061. This option is available depending on the operating system of the call server.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. To configure LLDP vendor-specific information for a call server server, enter:

    lldp vendor-specific call-server <1-8> <A.B.C.D>

  3. To configure LLDP vendor-specific information for a file server, enter

    lldp vendor-specific file-server <1-4> <A.B.C.D>

Example

Configure the LLDP vendor-specific information on a call server:

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#lldp vendor-specific call-server 1 192.0.2.0

Variable Definitions

The following table defines parameters for the lldp vendor-specific command.

Variable

Value

call-server <1-8> <A.B.C.D>

Specifies the Link Layer Discovery Protocol (LLDP) vendor specific information on the call server number and the IP address.

file-server <1-4> <A.B.C.D>

Specifies an LLDP vendor specific information on the file server number and the IP address.