Viewing the MLD snoop trace information

About this task

Use this procedure to display information about the multicast groups traversing the snoop enabled router.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > IPv6.
  2. Click IPv6 MLD.
  3. Click the Snoop Trace tab.

Snoop Trace field description

Use the data in the following table to use the Snoop Trace tab.

Field

Description

GrpAddr

Specifies the IP multicast address of the group traversing the router.

SrcAddr

Specifies the IP source address of the multicast group address.

OutVlan

Specifies the egress VLAN ID for the multicast group.

OutPort

Specifies the egress port of the multicast group.

InVlan

Specfies the ingress VLAN ID for the multicast source.

InPort

Specifies the ingress port for the multicast group.

Type

Specifies the port type on which the snoop entry is learnt.