Viewing virtual neighbors

View information about the neighbors on the virtual link to the OSPFv3 backbone.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > IPv6.
  2. Click OSPFv3.
  3. Click the Virtual Neighbors tab.

Virtual Neighbors field descriptions

Use the data in the following table to use the Virtual Neighbors tab.

Name

Description

Area

Shows the ID for the transit area.

RtrId

Shows the ID for the neighboring router in the autonomous system.

LocalIfIndex

Shows the local interface ID for the virtual link over which the switch can reach the neighbor.

AddressType

Shows the type of address as one of the following:

  • ipv4

  • ipv6

  • ipv4z

  • ipv6z

  • dns

ipv4z and ipv6z indicate a scope zone.

Address

Shows the IPv6 address that this virtual neighbor advertises. This value must be a global scope address.

Options

Shows a bit mask that corresponds to the OSPF options field of the neighbor.

State

Shows the state of the virtual neighbor relationship. The value can be one of the following:

  • down

  • attempt

  • init

  • twoWay

  • exchangeStart

  • exchange

  • loading

  • full