Configuring the VLAN feature on a port

Configure the VLAN feature on a port.

Procedure

In the Device Physical View tab, select a port or multiple ports.
In the Navigation tree, expand the following folders: Configuration > Edit > Port.
Click General.
Click the VLAN tab.
To perform tagging, select PerformTagging.
To discard tagged frames, select DiscardTaggedFrames.
To discard untagged frames, select DiscardUntaggedFrames.
To use the Untag Default VLAN feature, select UntagDefaultVlan.

Important

Enable tagging on the port before you configure UntagDefaultVlans.
Enter a default VLAN ID.
To enable spoof detect, select SpoofDetect.
In the Classification area, select the types of VLAN to enable.
In the Classification area, select the Private VLAN port type.

See Creating a Private VLAN for more information.
Click Apply.
Click Close.

VLAN field descriptions

Use the data in the following table to use the VLAN tab.


Name	Description
PerformTagging	If checked, this port is a tagged (Trunk) Port. It can belong to multiple port-based VLANs and a VLAN tag is inserted in every frame it transmits. If it is not checked, the port is an untagged (Access) port. The default is disabled.
VlanIdList	Identifies which VLANs this port is assigned.
DiscardTaggedFrames	If selected, and the port is untagged (an access port), tagged frames received on the port are discarded by the forwarding process. If clear, tagged frames are processed normally. The default is disabled.
DiscardUntaggedFrames	If selected and the port is tagged (a trunk port), untagged frames received on the port are discarded by the forwarding process. If clear, untagged frames are processed normally. The default is disabled.
UntagDefaultVLAN	If selected, even if the port is tagged (a trunk port), frames forwarded to the default VLAN for the port are not tagged. The default is disabled.
UntaggedVlanIds	Identifies which VLANs this port is associated with as untagged.
DefaultVlanId	Specifies the VLAN ID assigned to untagged frames received on this trunk port that match no policy-based VLAN to which the port belongs.
SpoofDetect	Enables or disables spoof detection on the specified port.
Protocol	Enables protocol-based VLAN on the port. This feature is always enabled.
PrivateVlanPortType	Specifies the port type. If not specified, the port type defaults to None. Isolated: Only private VLANs are permitted on isolated ports. Promiscuous: Only private VLANs are permitted on promiscuous ports. Trunk: The port is tagged.
Origin Note: Exception: not supported on VSP 8600 Series and XA1400 Series.	Specifies the origin of VLAN configuration on the port, either manually configured through CLI or EDM or dynamically configured through Auto-sense.