Configure Port-Based Policing

Use a port-based policer to bandwidth-limit ingress traffic. The system drops or re-marks violating traffic.

Procedure

  1. In the Device Physical View tab, select a port.
  2. In the navigation tree, expand Configuration > Edit > Port.
  3. Select General.
  4. Select the Interface tab.
  5. From IngressRatePeak, type the value for the peak rate in Kbps.

    The peak rate must be greater than or equal to the service rate.

  6. From IngressRateSvc, type the value for the service rate in Kbps.
  7. Select Apply.