Configuring Fast Advertisement Interval on a port or a VRF instance

About this task

Configure the Fast Advertisement Interval to send VRRP advertisement messages. The interval can be between 200 and 1000 milliseconds, and it must be the same on all participating routers. The default is 200. Enter the values in multiples of 200 milliseconds.

Procedure

  1. In the Device Physical View tab, select a port.
  2. In the navigation pane, expand the following folders: Configuration > Edit > Port.
  3. Click IP.
  4. Click the VRRP tab.
  5. Click Insert.
  6. In the Insert VRRP dialog box, enable FasterAdvIntervalEnable.
  7. In the FasterAdvInterval field, enter a value. You must set this value using multiples of 200 milliseconds.
  8. Click Insert.
9037147-00 Rev AB