View LLDP-MED Neighbor Policy Information

About this task

Perform this procedure to view policy information of remote LLDP-MED on specific ports.

Procedure

  1. In the navigation pane, expand Configuration > Edit > Diagnostics > 802_1ab.
  2. Click Port MED.
  3. Click the Neighbor Policy tab.

Neighbor Policy Field Descriptions

Name

Description

TimeMark

Specifies the time filter. For more information about TimeFilter, see the TimeFilter textual convention in IETF RFC 2021.

LocalPortNum

Specifies the port on which the remote LLDP-MED information is received.

Index

Specifies the particular connection instance that is unique to the remote LLDP-MED.

PolicyAppType

Specifies the policy application type.

PolicyVlanId

Specifies the VLAN ID for the port, as defined in IEEE 802.1Q-2003. The value 0 is used if the device is using priority tagged frames, which means only the 802.1D priority level is significant, and the default VLAN ID of the ingress port is used instead.

PolicyPriority

Specifies the Layer 2 priority used for the specified application type, as defined in IEEE 802.1D-2004. The default value is 0.

PolicyDscp

Specifies the value of the Differentiated Service Code Point (DSCP) associated with a specific port on the remote LLDP-MED, as defined in IETF RFC 2474 and RFC 2475. The default value is 0.

PolicyUnknown

Specifies the network policy for the remote LLDP-MED is currently unknown.

PolicyTagged

Specifies whether the application uses a tagged or untagged VLAN, as defined by IEEE 802.1Q-2003.

  • true — uses tagged VLAN

  • false — uses untagged VLAN or does not support a port based VLAN