Viewing ACL Statistics

About this task

Graph statistics for a specific ACL ID to view default statistics.

Procedure

  1. In the navigation pane, expand the Configuration > Security > Data Path folders.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select an ACL.
  5. Click Graph.
  6. You can click Clear Counters to clear the Statistics fields.

Statistics Field Descriptions

Use the data in the following table to use the Statistics tab.

Name

Description

AclId

Specifies the ACL ID.

MatchDefaultSecurityPkts

Shows a security packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultSecurityOctets

Shows a security byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultQosPkts

Shows a QoS packet count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchDefaultQosOctets

Shows a QoS byte count of traffic that does not match an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalSecurityPkts

Shows a security packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalSecurityOctets

Shows a security byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalQosPkts

Shows a QoS packet count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

MatchGlobalQosOctets

Shows a QoS byte count of traffic that matches an ACE rule or hits the default action if count is configured in the ACL global action.

DefaultGreenBytes

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows byte count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultGreenPackets

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows packet count of traffic sent with a rate lower than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultYellowBytes

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows byte count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultYellowPackets

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows packet count of traffic sent with a rate lower than peak-rate and higher than committed-rate matching any of the ACE rules or hits on Default Action.

DefaultRedBytes

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows byte count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.

DefaultRedPackets

Note:

Exception: Only supported on VSP 4900 Series, VSP 7400 Series, 5520 Series, and 5420 Series.

Shows packet count of traffic sent with a rate higher than peak-rate matching any of the ACE rules or hits on Default Action.
9037147-00 Rev AB