Enable RADIUS Accounting Interim Request
About this task
Enable the RADIUS accounting interim request feature to create a log whenever more than the specified number of CLI commands are executed.
Procedure
- In the navigation pane, exapnd .
- Click RADIUS.
- In the RADIUS Global tab, type the number of CLI commands in the CliCmdCount field.
- Click Apply.
RADIUS Global Field Descriptions
Use the data in the following table to use the RADIUS Global tab.
|
Name |
Description |
|---|---|
|
Enable |
Enables the RADIUS authentication feature globally. |
|
MaxNumberServer |
Specifies the maximum number of servers to be used, between 1 and 10, inclusive. |
|
AccessPriorityAttrValue |
Specific to RADIUS authentication. Specifies the vendor-specific attribute value of the access-priority attribute to match the type value set in the dictionary file on the RADIUS server. The valid values are 192 through 240. The default is 192. |
|
AcctEnable |
Enables RADIUS accounting. |
|
AcctAttriValue |
Specific to RADIUS accounting. Specifies the vendor-specific attribute value of the CLI-command attribute to match the type value set in the dictionary file on the RADIUS server. This value must be different from the access-priority attribute value configured for authentication. The valid values are 192 through 240. The default value is 193. |
|
AcctIncludeCli |
Specifies whether you want CLI commands included in RADIUS accounting requests. |
|
ClearStat |
Clears RADIUS statistics from the device. |
|
McastAttributeValue |
Specifies the value of the Mcast attribute. The valid values are 0 through 255. The default value is 90. |
|
AuthInfoAttrValue |
Specifies the value of the authentication information attribute. The valid values are 0 through 255. The default value is 91. |
|
CommandAccessAttrValue |
Specifies the value of the command access attribute. The valid values are 192 through 240. The default value is 194. |
|
CliCommandAttrValue |
Specifies the value of the CLI command attribute. The valid values are 192 through 240. The default value is 195. |
|
AuthInvalidServerAddress |
Displays the number of access responses from unknown or invalid RADIUS servers. |
|
SourceIpFlag Note:
Exception: only supported on VSP 8600 Series. |
Includes a configured IP address as the source address in RADIUS packets. The default is false. RADIUS supports IPv4 and IPv6 addresses with no difference in functionality or configuration. |
|
CliCmdCount |
Gives the value for the CLI command count. Specify an integer from 1 to 40. The default is 40. |
|
CliProfEnable |
Enables RADIUS CLI profiling. |
|
SupportedVendorIds |
Shows the vendor IDs that the software supports for RADIUS. |
|
RadiusReachability |
Specifies the mode for RADIUS reachability. Status-server mode provides a standard-compliant method for RADIUS reachability. Use-radius mode requires the configuration of dummy packets that are sent to RADIUS servers. The default is use-radius mode. |
|
SecureEnable |
Enable RADIUS Security (RADSec). |
|
UserName |
Specifies the username for RADIUS server reachability. The default is extremenetworks. |
|
Password |
Specifies the password for RADIUS server reachability. The default is extremenetworks. |
|
Confirm Password |
Confirms the password for RADIUS server reachability. |
|
Unreachable Timer |
Specifies, in seconds, the interval between checks when radius server is unreachable. The default is 60 seconds. |
|
Keep Alive Timer |
Specifies, in seconds, the interval between checks when radius server is reachable. The default is 180 seconds. |